Tiny chip provides a big boost in precision optics

Tiny chip provides a big boost in precision optics


A 1 mm by 1 mm integrated photonic chip developed by Jaime Cardenas, assistant professor of optics, and PhD student Meiting Song (lead author) will make interferometers—and therefore precision optics—even more powerful. Potential applications include more sensitive devices for measuring tiny flaws on mirrors, or dispersion of pollutants in the atmosphere, and ultimately, quantum applications. Credit: University of Rochester / J. Adam Fenster

By merging two or more sources of light, interferometers create interference patterns that can provide remarkably detailed information about everything they illuminate, from a tiny flaw on a mirror, to the dispersion of pollutants in the atmosphere, to gravitational patterns in far reaches of the Universe.


“If you want to measure something with very high precision, you almost always use an , because light makes for a very precise ruler,” says Jaime Cardenas, assistant professor of optics at the University of Rochester.

Now, the Cardenas Lab has created a way to make these optical workhorses even more useful and sensitive. Meiting Song, a Ph.D. student, has for the first time packaged an experimental way of amplifying interferometric signals—without a corresponding increase in extraneous, unwanted input, or “noise”—on a 1 mm by 1 mm integrated photonic . The breakthrough, described in Nature Communications, is based on a theory of weak value amplification with waveguides that was developed by Andrew Jordan, a professor of physics at Rochester, and students in his lab.

Jordan and his group have been studying weak value amplification for over a decade. They have applied mode analysis in a novel way on free space interferometer with weak value amplification, which bridged the gap between and waveguide weak value amplification. Therefore, they were able to prove the theoretical feasibility of integrating weak value amplification on a .

“Basically, you can think of the weak value amplification technique as giving you amplification for free. It’s not exactly free since you sacrifice power, but it’s almost for free, because you can amplify the signal without adding noise—which is a very big deal,” Cardenas says.

Tiny chip provides a big boost in precision optics
Traditional interferometry (left) requires an elaborate set up of mirrors and laser systems all very painstakingly and carefully aligned,” Cardenas says. Song “distilled all of this and put it into a photonic chip.” The chip requires only a single microscope (right). Credit: University of Rochester / J. Adam Fenster

Weak value is based on the quantum mechanics of light, and basically involves directing only certain photons that contain the information needed, to a detector. The concept has been demonstrated before, “but it’s always with a large setup in a lab with a table, a bunch of mirrors and laser systems, all very painstakingly and carefully aligned,” Cardenas says.

“Meiting distilled all of this and put it into a photonic chip,” Cardenas says. “And by having the interferometer on a chip, you can put it on a rocket, or a helicopter, in your phone—wherever you want—and it will never be misaligned.”

The device Song created does not look like a traditional interferometer. Instead of using a set of tilted mirrors to bend light and create an , Song’s device includes a waveguide engineered to propagate the wavefront of an optical field through the chip.

“This is one of the novelties of the paper,” Cardenas says. “No one has really talked about wavefront engineering on a photonic chip.”

With traditional interferometers, the signal to noise ratio can be increased, resulting in more meaningful input, by simply cranking up the laser power. But there’s actually a limitation, Cardenas says, because the traditional detectors used with interferometers can handle only so much laser power before becoming saturated, at which point the signal to noise ratio can’t be increased.

Tiny chip provides a big boost in precision optics
Jaime Cardenas (left) and Meiting Song in the Cardenas Lab at Rochester’s Institute of Optics. Credit: University of Rochester / J. Adam Fenster

Song’s device removes that limitation by reaching the same interferometer signal with less light at the detectors, which leaves room to increase the signal to noise ratio by continuing to add laser power.

Bottom line: “If the same amount of power reaches the detector in Meiting’s weak value device as in a traditional , Meiting’s device will always have a better signal to noise ratio,” Cardenas says. “This work is really cool, really subtle, with a lot of very nice physics and engineering going on in the background.”

Next steps will include adapting the device for coherent communications and quantum applications using squeezed or entangled photons to enable devices such as quantum gyroscopes.

Other collaborators include Yi Zhang and Juniyali Nauriyal of the Cardenas lab, John Steinmetz of the Department of Physics and Astronomy, and Kevin Lyons of Hoplite AI.


A traffic light for light-on-a-chip


More information:
Meiting Song et al, Enhanced on-chip phase measurement by inverse weak value amplification, Nature Communications (2021). DOI: 10.1038/s41467-021-26522-2

Citation:
Tiny chip provides a big boost in precision optics (2021, November 12)
retrieved 12 November 2021
from https://phys.org/news/2021-11-tiny-chip-big-boost-precision.html

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no
part may be reproduced without the written permission. The content is provided for information purposes only.



Source link

1 COMMENT

  1. It’s not exactly free since you sacrifice power, but it’s almost for free, because you can amplify the signal without adding noise—which is a very big deal.

Leave a Reply